My new donor PCB's arrived care of eBay, and they're exactly as cheaply made as you'd expect of knockoffs. In comparison, the official CCP is a thing of beauty.
Tuesday, 19 July 2016
Fighting Frame - Finale!
My new donor PCB's arrived care of eBay, and they're exactly as cheaply made as you'd expect of knockoffs. In comparison, the official CCP is a thing of beauty.
Friday, 15 July 2016
Fighting Frame - Part Two
Since the previous entry i've decided to optimise the build slightly, shedding the two separate wiimote bulkheads by integrating them into the front and back "wall" sections. Two fewer pieces, much improved!
Thursday, 14 July 2016
Fighting Frame - Part One
With the Lucario Fight Stick finished, it's time to move on to my "Player 2" build (for lots of Virtual Console co-op fun!). I was considering going with another intensive Pokken character build, but i wanted more time to think about the next case style for that.
But, as a gift to "the people", i've decided to try my hand at a cheap, easy to build stick which uses Ikea parts to present a high quality finish without the usual skill requirement. It features replaceable art, has no visible screws, requires only the most basic of tools, and all it takes is a sheet of 7mm plywood and a picture frame! Total cost of materials was about $15.
But, as a gift to "the people", i've decided to try my hand at a cheap, easy to build stick which uses Ikea parts to present a high quality finish without the usual skill requirement. It features replaceable art, has no visible screws, requires only the most basic of tools, and all it takes is a sheet of 7mm plywood and a picture frame! Total cost of materials was about $15.
Subscribe to:
Posts (Atom)